ORACAL 1668 soft PVC film on 100 cm wide roll available in white. Glossy surface, with excellent opacity.
- Thickness: 100 microns
- Adhesive: polyacrylate, removable, black opaque
- Silicone coated on one side, 135 g/m2
- Screen printing is recommended. Special inks are necessary for letterpress and UV-offset printing
- Water resistance: adhered to aluminium, after 48h/23° C no variation
- Temperature resistance: Adhered to aluminium, -40°C to + 80°C no variation
- Adhesive power (FINAT TM 1, after 24h, stainless steel): 6N/25mm
- Tensile strength (DIN EN ISO 527)
-
- along: min. 19 MPa
- across: min. 19 MPa
- Elongation at break (DIN EN ISO 527)
- along: min. 130%
- across: min. 150%
- Application temperature: > +10°C
- Use:
- for signs and decorations requiring high resistance and durability on means of transport
- on a very dark background
- under vertical outdoor exposure
- service life by specialist application: 2 years (not printed)
- Removable from most surfaces within 1 year, without residue
ATENTION: Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any other
contamination that could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry
for at least three weeks and to completely cure. The compatibility of selected lacquers and paints should be tested by the
user, prior to application of the material. Furthermore, the application information published by ORAFOL must be considered.
The batch traceability according to ISO 9001 is possible on the basis of the roll number.