• Subli Glaze is an innovative solution that allows you to create your own sublimation coating on various surfaces. Each spray is destined to specified surfaces.
• The layer that forms on the surface of the object allows you to make sublimation prints on materials that did not have a polyester coating
• Spray will be perfect when, for example, we want to make a sublimation print on a handicraft purchased by a local artist (e.g. souvenirs from the mountains, from the seaside) or an original item bought at an flea market
• Subli Glaze allows you to combine tradition with modernity in an original way
• Coverage of one can - on average 2-3 square meters, but there are a lot of variables to take into account such as how many layers are applied, how even the layers of spray applied are, how absorbent the surface is etc.

Check Subli Glaze application matching

• Create a DIY sublimation coating on another surfaces, eg.: ceramics, wood, glass, metal or stone
• Create a matte layer can be used alone as a direct sublimation coating or in combination with other Subli Glaze preparations
• Subli Glaze facilitates the transfer of graphics by combining sublimation inks with a polymer substrate
• If the item does not have a sublimation coating, the image will not be transferred without using Subli Glaze

1. Shake the can for 1 minute
2. Make sure the surface to be painted is clean, dry and degreased
3. Apply a smooth and even coating of Subli Glaze, holding the can approx. 30cm from the surface, using streak painting
4. Work at room temperature and in a ventilated room
5. Paint a few streaks for a more matte finish, but don't allow the spray to pool on the surface
6. Leave to air dry for 10 minutes then cure in the oven at 160°C for 15-20 minutes

Shipping outside the European Union may involve additional formalities and higher transport costs. The goods are unsuitable for air transport.