Our sites (ticks and movies)

Sign up for our Newsletter

Sign up for our Newsletter:
Receive information about new products and promotions !

Enter code:
Captcha

I have read and accept the Terms and Privacy Policy.

I agree to receive the newsletter and information about promotions.

zapisz się

UniFlex Quick Blocksub film

  • UniFlex Quick Blocksub film
  • UniFlex Quick Blocksub film
  • UniFlex Quick Blocksub film
  • UniFlex Quick Blocksub film
  • UniFlex Quick Blocksub film
  • UniFlex Quick Blocksub film

Thickness: 115 µm

Dimension: 0.5 x 1 m

Colour: white

Type: TF-0186

Peeling: warm

Stock code: 6X86WH0CF

  • Attention! Fields marked with an asterisk (*) are required

    * I have read and accept the Terms and Privacy Policy.

    * I agree to receive the newsletter and information about promotions.

DELIVERY COST

Delivery cost depends on the destination and it is individually calculated. You will be informed about this cost in order confirmation.

If you need this information earlier, contact our Sales Department please.

All information about cost are available here

8,31 € gross

/ 6,76 € net

Recommend Us
To recommend a product, you must be logged in

Please inform me about price decrease of this product.

  • * I have read and accept the Terms and Privacy Policy.

    * I agree to receive the newsletter and information about promotions.

  • Ecofriendly UniFlex Quick Blocksub film has a water based polyurethane coating, which is laminated between a NON adhesive polyester carrier and a heat adhesive layer
  • It is suitable for all sublimated textiles
  • Perfect for softshell fabrics or fabrics with a tendency to migration the dye
  • Full opacity allows it to be applied on all texiles, even with printed stripes
  • Total barrier against sublimation ink: an additional layer between heat adhesive and polyurethane
  • Non adhesive carrier is easy to stack and handle
  • The foil contains only inert ingredients, REACH compliant, without PVC (PVC free) , plasticizers, heavy metals, VOC
  • Foil thickness - 115µm, carrier thickness 100µm
  • The UniFlex Quick Blocksub brings great wear comfort: soft and flexible film
  • Blocksub film is easy and accurate weeding
  • The advantage of the UniFlex Quick Blocksub foil is the short heat-up time at low temperature: 130°C / 5 seconds
  • Always protect Flex material from direct contact with heating plate with a release baking paper
  • The film has a high resistance to washing at 40°C
  • Very flexible and strong film does not wrinkle after washing and maintains its proper appearance for a long time
  • UNIFLEX QUICK BLOCKSUB is recommended on sublimated polyester or softshell with an additional protective layer to prevent ink migration.
  • Made 100% in the EU - all operations made under one roof - low carbon profile manufacturing
Instruction:

Make trials with any new textile.
  • Cut the foil left-handedly on the black side of the foil, then put it with the black color to the material
  • Heat at 130°C for 5 seconds, remove on hot (after 5-6 sec.) Securing the print with auxiliary paper (e.g. Matt Finish )
  • Use medium pressure
  • In order to prevent resublimation, it is recommended, NOT to preheat garments
  • Just after heat transfer, DO NOT stack or fold warm garments, as this could cause resublimation on the external side of the Flex material
  • After the transfer, wait 24 hours before washing. Do not use bleach or other aggressive chemicals. Iron inside. Store in a cool and dry room, protected from direct sunlight.
  • Uniflex A Nature film must be protected against direct contact with the hot heating plate with auxiliary paper (e.g. Matt Finish )