Sign up for our Newsletter

Sign up for our Newsletter:
Receive information about new products and promotions !

Enter code:
Captcha

I have read and accept the Terms and Privacy Policy.

I agree to receive marketing information (Newsletter) to my mailbox. I can unsubscribe from the Newsletter at any time here


zapisz się

Our sites (ticks and movies)

Laminating film UV Oraguard 200

  • Laminating film UV Oraguard 200
  • Laminating film UV Oraguard 200
  • Laminating film UV Oraguard 200
  • Laminating film UV Oraguard 200
  • Laminating film UV Oraguard 200

Thickness: 70 µm

Dimension: 1,05 x 1 m

Type: glossy

Stock code: WL01G00EU105

  • Attention! Fields marked with an asterisk (*) are required

    * I have read and accept the Terms and Privacy Policy.

    I agree to receive marketing information (Newsletter) to my mailbox. I can unsubscribe from the Newsletter at any time here

DELIVERY COST

Delivery cost depends on the destination and it is individually calculated. You will be informed about this cost in order confirmation.

If you need this information earlier, contact our Sales Department please.

All information about cost are available here

5,89 € gross

/ 4,79 € net

To recommend a product, you must be logged in

Please inform me about price decrease of this product.

  • * I have read and accept the Terms and Privacy Policy.

    * I agree to receive marketing information (Newsletter) to my mailbox. I can unsubscribe from the Newsletter at any time here

Soft PVC film with a high level of UV protection in a glossy finish on 105 cm roll.

UV Oraguard 200 Soft PVC film with a high level of UV protection. Extends the durability of prints by 1 year.

  • For the indoor and short-term outdoor protection of large format digital prints.
  • Thickness (without protective paper and adhesive): 70 µm
  • Adhesive: polyacrylate, permanent
  • Release paper: silicone coated paper, white 90 g/m2
  • Temperature resistance: adhered to aluminium, -40°C to +80°C no variation
  • Adhesive power (FINAT TM 1, after 24h, stainless steel): 10 N/25mm
  • Tensile strength (DIN EN ISO 527)
    • along: min. 19 MPa
    • across: min. 19 MPa
  • Elongation at break (DIN EN ISO 527)
    • along: min. 130%
    • across: min. 150%
  • Application temperature: > +10°C
  • Resistance to solvents and chemicals: at room temperature, 72h after adhesion to aluminium, resistant to water, cleaning agents, alcohol and aliphatic solvents

ATENTION: Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any other contamination that could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Furthermore, the application information published by ORAFOL must be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.