Classic Plus Universal - Transfer paper for light textiles - 100 sheets

• Basic weight: 135 g/m2
• Transfer paper from the renowned FOREVER brand is compatible with most commercially available laser printers and copiers in the CMYK palette
• For printing and transferring onto white and light-colored cotton fabrics or cotton-polyester blends, bags, pillows, and other fabric items
• Classic+ Universal white T-shirt transfer paper for laser printers is especially recommended for printing full graphics with regular shapes, e.g., photos
• Laser thermal transfer paper for white and light-colored T-shirts guarantees excellent image resolution and saturated colors, and the print is pleasant to the touch and flexible
• Classic Plus Universal transfer papers for light fabrics are suitable for use with natural (cotton) and synthetic textiles: T-shirts, sweatshirts, fabric bags, pillows, mouse pads, and more
• Thermal transfer papers enable easy branding and gadget production: all you need is a laser printer, selected blank item, and flat press
• FOREVER brand transfer papers are Oeko-Tex® Standard 100 Class I certified – they are environmentally and skin-friendly, do not cause allergic reactions, and can be used on clothing for children under 3 years of age. A certificate can be obtained after purchase.
•  The high heat-sealing temperature of 200°C requires prior testing of the specific fabric.

Application instructions:

• Print the selected design left-side up (mirror image); Insert the sheet into the manual feeder so that the print appears on the white side without the manufacturer's markings
• Pay attention to the printer settings for heavy paper or labels
• If there are any blank, unprinted areas on the printout, cut them off
• Place the material you want to mark on the heat press. Make sure it's free of any dirt and iron it for a few seconds to remove any moisture.
• Place the paper with the design side down on the substrate.
• Heat the design onto the material at 200°C for 10-15 seconds, using considerable pressure from the heat press
• After opening the heat press, immediately remove the warm paper with a smooth movement, maintaining the smallest possible angle; never remove the sleeve from the heat press before removing the paper
• After removing the paper, you can gently stretch the print in all directions to make it more flexible
• Optional: To fix the finished print, you can iron it again with Matt Finish support paper for approximately 10 seconds at 200°C. Also remove the support paper while warm.
• Note: Fabric printed with Classic Plus Universal can be washed at a maximum temperature of 40°C using mild detergents. Do not bleach. Do not iron the printed area.