Laser Transparent (No Background) - Transfer paper for light textiles for laser printers - 10 sheets

8,28 € net

/ 10,18 € gross

(Price per piece: 0,83 € net)

Discount

Quantity:

Add to cart

Brand FOREVER

Dimensions A3

Grammage 145 g/m²

Quantity of sheets 10

Stock code 6PL1102F4A310

Share this product:

Product description

Laser-Transparent (No Background) - Transfer paper for light textiles for laser printers

Innovative no-cut technology - it leaves no white background on the unprinted areas
Laser-Transparent (No Background) is ideal for printing vector graphics
With a color intensity of at least 80% on light-colored T-shirts and other textile surfaces, you can achieve perfect results
Laser-Transparent (No Background) is ideally suited for the new generation of colour copiers and colour laser printers
High wash fastness up to 40°C
Do not tumble dry! Hang dry or line dry recommended
When ironing cover the print with baking paper
Soft touch

APPLICATION SETTINGS

Cut around the edge of the image
Place the shirt and the transfer media with the printed side facing down on the press:

FOR PHOTOGRAPHS ON COTTON: 30 seconds with 5 bar (72.5 PSI) maximum pressure at 180°C (356°F). Separate the transfer immediately using a slow, low & fluid motion.
FOR PHOTOGRAPHS ON POLYESTER: 30 seconds with 5 bar (72.5 PSI) maximum pressure at 150°C (302°F). Separate the transfer immediately using a slow, low & fluid motion
FOR VECTORIZED IMAGES ON COTTON: 15 seconds with 0.5 bar (7.25 PSI) lowest pressure setting at 180°C (356°F). Re-press for a further 5 seconds with 3 bar (43.5 PSI) medium pressure at 180°C (356°F). Rub the transfer vigorously with a piece of cloth for 5 seconds (without removing the t-shirt from the press). Separate the transfer gently using a slow, low & fluid motion. If you see toner residue on the paper,you can cool the toner by rubbing the transfer for a few seconds more. Cover with a sheet of silicone paper (e.g. Matt Finish ) and re-press for a further 30 seconds using 5 bar (72.5 PSI) maximum pressure at 180°C (356°F)
FOR VECTORIZED IMAGES ON POLYESTER: 10-15 seconds with 4 bar (58 PSI) high pressure at 150°C (302°F). Separate the transfer immediately using a slow, low & fluid motion. Note: If you see toner residue on the paper, you can cool the toner by rubbing the transfer for a few seconds with a piece of cloth. Cover with a sheet of silicone paper and re-press: Automatic Heat Press: 20 seconds with 5 bar (72.5 PSI) high pressure at 150°C (302°F) or Manual Heat Press: 30 seconds with maximum pressure at 150°C (302°F)

IMPORTANT

Image gradients & transparency‘s should not be less than 80%. Light transparency‘s within designs are unpredictable when transferred to textiles
Place the fabric completely flat on the work surface. Please ensure that no buttons, seams or collars are on the work surface. If this is not possible, you should put the shirt over the lower plate, so that only the transferable side is effected by the heat and pressure from the press
For higher washability you can increase the pressure, the temperature, the time or all at once
The waiting period is very important - please do not separate the media too early or too late
If a background is transferred, reducing the transfer time or the pressure, will prevent this
If the toner can not be completely transferred, increasing the pressure or the transfer time will prevent this
If, in spite of everything, the background is still transferred in certain areas, you can use a fresh sheet of paper, in a further pressing operation