SubliTex flex film for sublimation with dimensions of 0.5 x 1 m
- White polyester textile for sublimated printers for heat transfer applications
- Suitable for cotton, polyester, acrylic and similar fibers
- You can also print the SUBLITEX with solvents and eco-solvents inks
- Prepare the image on positive following the instruction of the printer producer: take care of the printing and drying temperatures, use the adequate printing profile
- Remove the product from the printer
- Cutting: use knife 60°
- Heat pressing: weed the excess material and remove the polyester carrier, position and heat press your logo onto the garment protected by a silicone paper at 170°C during 50 seconds
Application instructions:
- Print a legible motif on the foil - place it directly in the feeder of the sublimation printer and pay attention to the type of media due to its considerable grammage
- Wait a few minutes to dry the ink completely
- Cut print on a plotter; a knife with a cutting angle of 60o should cut only the foil without the polyester spacer
- Select unnecessary foil fragments and remove the transparent transport foil
- Place a pattern on a T-shirt or other medium, then cover everything Auxiliary silicone paper AntiStick
- Make a transfer at 170oC in 50 seconds
The film has the Oeko-Tex standard 100 certificate. It proves the quality of textile products which come into direct contact with human skin. The Oeko-Tex certificate guarantees that products are free of 100 the most dangerous substances that threaten health (including formaldehyde, pesticides or substances that often cause allergies). Smells and resistance to sweat and saliva are also assessed.
This foil has been awarded the EVE Vegan certificate, which means that any animal-derived materials haven't been used in production. Textiles with film's prints fit perfectly into the popular vegan lifestyle.