Oraguard 372 anti-graffiti special polyester film with a glossy surface.
UV Oraguard 372 transparent polyester film. Protects surfaces from dirt and UV rays. Using a suitable cleaning solvent, graffiti can be removed quickly and without damaging the film surface.
- Excellent protection against graffiti and environmental influences in indoor and outdoor applications (Anti Graffiti Film) on
even surfaces
- Thickness (without protective paper and adhesive): 23 µm
- Adhesive: solvent polyacrylate, permanent
- Release paper: double sided PE coated paper, one side siliconised, 160 g/m2
- Temperature resistance: adhered to aluminium -40°C to +120°C no variation
- Seawater resistance (DIN 50021) adhered to aluminium, after 100h/23°C no variation
- Adhesive power (FINAT TM 1, after 24h, stainless steel): 12 N/25mm
- Resistance to solvents and chemicals: adhered to aluminium resistant to most mineral oils and fats, fuels, solvents, mild acids, salts and alkalics>/li>
- Resistance to solvents and chemicals: at room temperature, 72h after adhesion to aluminium, resistant to water, cleaning agents, alcohol and aliphatic solvents
- Application temperature: > +10°C
- Service life by specialist application under vertical outdoor exposure (standard central European climate): 3 years
ATENTION: Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any other
contamination that could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry
for at least three weeks and to completely cure. The compatibility of selected lacquers and paints should be tested by the
user, prior to application of the material. Furthermore, the application information published by ORAFOL must be considered.
The batch traceability according to ISO 9001 is possible on the basis of the roll number.