Sign up for our Newsletter:
Receive information about new products and promotions !

I have read and accept the Terms and Privacy Policy.

I agree to receive marketing information (Newsletter) to my mailbox. I can unsubscribe from the Newsletter at any time here

Our sites (ticks and movies)

Oracal 9300 - self-adhesive photoluminescent film (glow in the dark)

Thickness: 150 µm

Dimension: 1 x 1 m

Type: glossy

Stock code: WFYEG00EU100

Your ID:
Name and Surname:
Post code:*
Your e-mail:*
Phone number:
Question:*
Attention! Fields marked with an asterisk (*) are required

* I have read and accept the Terms and Privacy Policy.

I agree to receive marketing information (Newsletter) to my mailbox. I can unsubscribe from the Newsletter at any time here

DELIVERY COST

Delivery cost depends on the destination and it is individually calculated. You will be informed about this cost in order confirmation.

If you need this information earlier, contact our Sales Department please.

All information about cost are available here

61,52 € gross

/ 50,02 € net

To recommend a product, you must be logged in

Please inform me about price decrease of this product.

Yours e-mail address:
* I have read and accept the Terms and Privacy Policy.

* I agree to receive marketing information (Newsletter) to my mailbox. I can unsubscribe from the Newsletter at any time here

Glossy, self-adhesive photoluminescent film Oracal 9300 - glow in the dark

Thickness - 150 microns
Dimension - 1 x 1 m
Light yellow special PVC film, cadmium-free,
Surface matt - silky
The foil gives an intense and long-lasting effect of secondary lighting after switching off the light source
The foil can be used many times without any deterioration of the luminescent properties
Contains no radioactive materials
Glow-in-the-dark foil will be especially useful in emergency situations after turning off the light source
Ideal for indoor evacuation and fire safety signs
Printing techniques: screen printing
Durability 5 years

TECHNICAL DATA

permanent adhesive: solvent-based polyacrylate
covering material: silicone-coated paper on one side, 148 g/m2
glow effect (DIN 67510-Jan.1992)
after 10 minutes: 20mcd/m2
after 60 minutes; 2.8 mcd/m2
decay time (DIN 67510-Jan.1992): 340min (0.3 mcd/m2)
dimensional stability (FINAT TM14): glued on steel, it shows no measurable shrinkage in the transverse direction; in the longitudinal direction <0.3mm
Water resistance (DIN50021): stuck on aluminum after 100 hours/23°C shows no change
temperature resistance: glued on aluminum -40st.C to +100st.C, in a short time, max. after 24h, at +100st.C shows no changes
flammability class (DIN 53 438 T3): F1
adhering strength (FINAT - test method I, after 24 hours, stainless steel): 18 N/25 mm
tear resistance (DIN EN ISO 527): longitudinal: min. 12MPa, transverse: min. 10MPa
tensile strength (DIN EN ISO 527) , longitudinal: min. 100%, transversal: min. 100%
recommended application temperature: above +8 degrees C
shelf life (in original packaging, at 20^oC and 50% relative humidity): 2 years

ATTENTION
The surface on which the foil is applied must be cleaned of dust, grease and other contaminants that could adversely affect the adhesion of the product. Freshly varnished or painted surfaces should be allowed to dry for a minimum of 3 weeks. The possibility of using selected varnishes or paints with self-adhesive foil should be checked before the final gluing of the foil. Before sticking the foil, check whether there are any chemical reactions between the foil and the substrate. In addition, any information on film application published by Orafol Europe GmbH (http://www.orafol.com) should be taken into account.