Heat transfer presses are used to apply graphics onto the target substrate using high temperature and pressure. Heat presses differ in their opening mechanisms (manual or automatic, clamshell or swing-away), temperature range, and additional features. This variety of heat transfer presses makes it possible to perfectly match the machine to individual needs. They can be used for techniques such as sublimation, flex and flock films, sublimation and solvent-based flex and flock, DTF, or transfers from laser and inkjet printers.
TC57LITE Energy Saver 40 x 50 cm Heat Press – modular, automatic clamshell press
The press has a fully modular design, consisting of: control unit, heating plate, lower plate, base frame, and power cable. All modules can be easily disassembled and replaced in just a few simple steps, allowing for broad customization depending on requirements
The transfer press can optionally be equipped with interchangeable plates in various sizes, a membrane lower plate, or dual-plate slide rails. It can also be expanded with a Bluetooth module
The press opens automatically once the set time has elapsed and notifies the user with an audible signal. The pressing process can be interrupted at any time by pressing a single button. Temperature and pressing time are selected via a digital controller
The pressure is adjusted using a knob located on top of the heating plate. The press also features an additional cover on the heating plate to protect the user from burns
The TC7 Energy Saver press features a modern heating plate with additional insulation, which significantly reduces energy consumption – by about 60% over the entire operating cycle compared to standard presses. The applied new technologies also reduce the carbon footprint, contributing to environmental protection. Automatic shut-off and sleep mode during idle times are additional advantages that support energy savings. Efficient energy management extends the lifespan of the device, thereby improving its performance and contributing to faster amortization of purchase costs. Even heat distribution ensures consistently high quality of transferred prints
The TC7 Smart Energy Saver 40 × 50 heat press is equipped with an innovative Bluetooth interface, which, together with the free Secabo Smart Transfer app, enables remote control of the press. The user can select the type of fabric or material to be printed, and the app will adjust the optimal combination of temperature, time, and pressure.
New features of the electronic control unit include, in addition to temperature and pressing time settings, functions such as pre-pressing, counter, sleep mode and automatic shut-off, the ability to store up to 10 transfer parameter settings in the press memory, and many more.
Specifications
Plate size: 40 x 50 cm
Max. pressure: 250 g/cm
Max. pressing temperature: 250 °C
Max. pressing time: 999 seconds
Max. opening angle: 40°
Voltage/Power: 230 V / 50Hz–60Hz / 1.8 kW
Operating conditions: +5 to +35 °C / 30–70% humidity
Net weight: 32 kg
Weight with packaging: 50.60 kg